auger speed

[16chalmers]

my control panel will not adjust the auger speed. Help

[Technical]

Hi 16chalmers,
Have you contacted the dealer that sold you the stove to test the control board?

[Turnerd]

I think my control board is malfunctioning. I seems like there is no pause between fuels feeds, I use to be able to count 5 seconds between each feed. Now it just seems to be a constant feed with maybe 1 second between, It is causing my stove to get to much fuel and chocking out.

Has anyone else had this problem?

My stove is a magnum winchester.

The dealer hopefully will be coming to check it out today.

[Technical]

I think my control board is malfunctioning. I seems like there is no pause between fuels feeds, I use to be able to count 5 seconds between each feed. Now it just seems to be a constant feed with maybe 1 second between, It is causing my stove to get to much fuel and chocking out.

Has anyone else had this problem?

My stove is a magnum winchester.

The dealer hopefully will be coming to check it out today.

Hi Turnerd,
Your post should be under the Winchester control board area as the control board on the Countryside is completely different from your control board. When your dealer comes out he should perform a feed rate test to determine if your control board is feeding correctly.